Berliner Kurierdienst

Guide

Curtainside van: dimensions and pallets

A curtainside van is a 3.5 t vehicle with a flatbed and curtain body. Typical load floors are about 3.2 to 4.5 m long and just over 2 m wide, taking four to nine Euro pallets on paper, depending on length and arrangement. Payload depends heavily on version and body.

The curtainside van fills the gap between panel van and truck: it is wider than a van, can be loaded from the side by forklift and stays in the 3.5 t class – toll-free and drivable on a category B licence. Here are typical dimensions and what they mean for your pallets.

As of: · Editorial team: Berliner Kurierdienst

Typical load floors

The figures come from manufacturer data for flatbed bodies of a widely used 3.5 t-class model. Curtain bodies from other makers and body builders are in similar ranges; inside height depends on the curtain frame and is not standardised.

These are typical guide values per body type, not a commitment for a particular vehicle. Give us your dimensions and we confirm a suitable vehicle.

The curtainside van with driver can be booked via book a curtainside van.

Bed length (example)WidthEuro pallets lengthwisemixed crosswise/lengthwise
approx. 3,200 mmapprox. 2,085 mm46
approx. 3,800 mmapprox. 2,085 mm67
approx. 4,500 mmapprox. 2,085 mm69

Why it suits pallets

Just over 2 m of width takes two Euro pallets (800 mm wide each) lengthwise side by side; each row needs 1,200 mm. At 3.8 m that is three rows, so six pallets; with some crosswise, seven fit on paper, at 4.5 m nine. In a panel van only crosswise pallets fit between the wheel arches – usually four, see Euro pallets per vehicle.

The second advantage is side loading: the curtain opens and a forklift can load from the side. That helps at addresses without a dock and on building sites, see construction site courier.

Payload and weight

For flatbeds of this model range the manufacturer gives payloads of roughly 0.7 to just over 1.6 t at 3.5 t maximum mass, depending on version; curtain, frame and tail lift reduce payload further. With six pallets, weight is therefore often the limit, not floor space.

Example: six pallets of 250 kg are 1.5 t – that may already be too much for a curtainside van. The 7.5-tonne truck is then the safe choice; more in the guide 7.5-tonne truck: load area.

Licence and toll

Up to 3,500 kg maximum mass a category B licence applies (§ 6 FeV). The German truck toll applies to vehicles over 3.5 t technically permissible maximum mass; the curtainside van in our tariff belongs to the 3.5 t class and is toll-free, see truck toll.

  • Give number, dimensions and weight of the pallets.
  • Clarify whether loading is from the side or the rear.
  • For loads over about 1 t or more pallets than the floor takes: ask for a 7.5-tonne truck.
  • Calculate the price in the price calculator with the curtainside van class.

Good to know

Load securing is mandatory: pallets are secured against sliding and tipping, see the load securing guide.

Questions and answers: Curtainside van: dimensions

How many Euro pallets fit on a curtainside van?

A typical load floor of about 3.8 × 2.1 m takes six Euro pallets lengthwise on paper, two side by side in three rows, or seven in a mixed arrangement. Whether the weight works depends on the payload.

Does a curtainside van need a truck licence?

No, in the 3.5 t class a category B licence is enough. For you as the client it does not matter anyway – we provide vehicle and driver.

Is the curtainside van subject to toll?

No. The truck toll applies to vehicles over 3.5 t technically permissible maximum mass; the curtainside van in our tariff is below that.