Guide
Van dimensions: load space and payload
For Sprinter-class vans, codes like L2H2 give body length (L) and roof height (H). Payload is the permissible maximum mass – for a category B licence at most 3,500 kg – minus kerb weight, and it varies considerably with equipment. What really counts is the size of your load.
“Will it fit in a Sprinter?” is one of the questions couriers hear most. The honest answer depends less on the vehicle name than on three figures: load length, width between the wheel arches and door opening – and on weight. Here is how to read manufacturer data and what we need from you.
At a glance
| Term | Meaning |
|---|---|
| L1, L2, L3 … | body length, ascending |
| H1, H2 … | roof height, ascending (H2 = high roof) |
| Permissible maximum mass | at most 3,500 kg for a category B licence |
| Payload | permissible maximum mass minus kerb weight |
| Load width | narrowest point between the wheel arches |
Typical dimensions of a large panel van
How much fits in a Sprinter-class van depends on length (L) and roof height (H). The technical data of a large 3.5 t-class panel van (manufacturer data for a widely used model, see sources) illustrate the order of magnitude. Other makes are in similar ranges; exact values differ.
These are typical manufacturer figures, not a commitment for a particular vehicle of ours. What counts is your dimensions and our confirmation.
You can book the right vehicle with driver on the page book a van.
| Variant (reference model Renault Master panel van) | max. load length | Width between wheel arches | Load volume |
|---|---|---|---|
| L2H2 | 3,225 mm | 1,380 mm | 10.8 m³ |
| L3H2 | 3,857 mm | 1,380 mm | 13 m³ |
| L3H3 | 3,857 mm | 1,380 mm | 14.8 m³ |
| L4H3 (rear-wheel drive) | 4,493 mm | 1,380 mm | 17 m³ |
Payload: why it varies
Payload is the permissible maximum mass minus kerb weight. At 3.5 t maximum mass – the limit for a category B licence, see the rules for vans – the heavier the vehicle itself, the less it can carry. A long wheelbase, high roof, racking, bulkhead or tail lift add weight. Manufacturers therefore give ranges: for the panel van above, diesel payload ranges from about 1.5 to just over 1.9 t depending on version and maximum mass; some of these variants are above 3.5 t.
In practice: a van your cartons fit into by size can still be overloaded. Always give us dimensions and weight. For heavy pallets the curtainside van or the 7.5-tonne truck is often the better choice.
What fits – worked examples
Euro pallets (1,200 × 800 mm) fit between the wheel arches lengthwise or crosswise. Crosswise – with the 1,200 mm side across – saves most space; each pallet then takes 800 mm of load length. With about 3.2 m of load length that is four pallets on paper, with about 3.9 m also four – a fifth only fits from about 4 m. More in the guide Euro pallets per vehicle.
Long items such as profiles or pipes need the full load length; above about 3.8 m only the longest variant or a flatbed will do. Tall equipment needs a high roof (H2/H3) and a large enough rear-door opening.
- Note the size of the largest item and the total weight.
- Check whether goods must travel upright.
- For pallets: number, height, weight per pallet.
- Choose the class in the price calculator – if unsure, we ask.
L and H
Manufacturers offer panel vans in several lengths (L1, L2, L3 …) and roof heights (H1, H2 …). Longer and higher means more volume – but payload does not rise with it.
Payload is not fixed
Payload = permissible maximum mass minus kerb weight. Racking, bulkhead, tail lift or all-wheel drive add weight and reduce payload.
3,500 kg as the limit
A category B licence generally allows vehicles up to 3,500 kg permissible maximum mass (special rule for certain alternatively fuelled vehicles). Above that the truck class begins – with toll and other rules.
Bottlenecks matter
A load space may be long enough, yet the door opening or the width between the wheel arches limits what fits. Tall and narrow or long and flat – the package decides.
In practice
With these details we choose the vehicle class: small van, 3.5 t van, curtainside van or truck. In borderline cases we ask for a photo with a tape measure.
The driver loads as agreed, secures the load and drives straight to the destination. If something does not fit as discussed, we tell you before departure.
Checklist
- How long, wide and high is the largest piece?
- How heavy is the whole shipment?
- Can it be stacked or must it travel upright?
- Is there a dock or forklift at the destination, or is unloading by hand?
Good to know
We deliberately give no interior dimensions of individual models: they differ by manufacturer, year and conversion. Only the data sheet of the actual vehicle is reliable – or your measurements and our check. Vehicle and load together may not exceed 2.55 m in width or 4 m in height (section 22 StVO).
Questions and answers: Vans: dimensions and payload
What does L2H2 mean on a Sprinter?
L2 stands for the medium body length, H2 for the high roof. Exact interior dimensions are in the data sheet of the specific vehicle.
How much payload does a 3.5 t van have?
It depends on kerb weight: permissible maximum mass minus kerb weight. Conversions such as racking or a tail lift reduce payload noticeably.
Do Euro pallets fit in a Sprinter?
Yes, if load length and width between the wheel arches allow. How many depends on the vehicle – give us number and weight and we choose accordingly.
Sources
- § 6 FeV – Fahrerlaubnisklassen (gesetze-im-internet.de) (accessed 2026-11-11)
- § 22 StVO – Ladung (gesetze-im-internet.de) (accessed 2026-11-11)
- EPAL – EPAL Europalette (accessed 2026-11-11)
- Renault Master panel van – technical data (manufacturer page, German) (accessed 2026-11-11)
- Section 6 FeV – driving licence categories (gesetze-im-internet.de, German) (accessed 2026-11-11)